Slot Car Components And Scale Sizes

There is more to slot cars than just being miniature mock-ups of real race cars. Most of them are lovingly manufactured from scratch by slot aficionados and most of these cars may be modified to accomplish better performance. Driving skills matter a lot in slot car racing because nothing’s really keeping the automobile on track except for the blade or pin in its bottom. So you actually ought to be proficient enough to ensure the cars don’t fly off in the track’s twists and turns.

Slot Car Sizes

Slot cars are available in different sizes including:

1:24 scale size- slot cars with this size need large course, making them inappropriate for home use. More often than not, 1:24 racing is held at commercial or club tracks. Cars included in this type come seven to eight ins long.

1:32 scale size – this is the hottest slot car size. These cars come smaller than 1:24 scale cars so they’re more acceptable for home enthusiasts. These are also a common choice for racers and enthusiasts about. Most 1:32 slot cars measure five to six inches long.

HO-sized slot cars – these cars differ in scale, ranging from 1:97 to 1:64 scale sizes. Despite what their size are, they operate on track with the same width. A regular HO-sized slot car may come 2.5 to 3.5 inches long.

Aside from these three major scales, 1:43 slot cars are also available in the market as toddler’s toys. In the 1960s, 1:48 slot cars were also advertized.


Slot Car Components

• Body

Also called shell, this component is comprised of solid molded plastic and is suited over the car’s chassis. Much like in solid cars, the weight of the vehicle’s body as well as the distribution of the said weight are considered in creating a slot car. Connected to the body is an internal portion which oftentimes comprises a driver figure. To make room for the motor and other components, most slot car interiors come only half the body’s height.

• Electric motor

This component may be positioned in front, in the middle, or at the back of the slot car. Motors are rated by means of their speed or their revolutions per minute. This factor is resolute by gauging the amount of voltage received by the motor.

• Guide

Dubbed as guide flag, this is the plastic piece placed under the vehicle’s chassis to help the motor car in running along the slot. This guide, which holds the braids, pivots in the slot.

• Gears

These components play a major role in the slot car’s acceleration and speed. Standard gears, including the small gear that’s attached to the motor, may be upgraded using aftermarket components to deliver better performance.

• Magnets

These components are installed in the front and rear percentage of the slot to provide the vehicle with downforce. This guarantees the vehicle does not fly troubled. Some racers prefer slot cars without magnets and favor the application of lead weights. Some even want to race without magnets or weights at all.

• Microchip

Not all slot cars come equipped with such component. The microchip allows the slot car to follow a car in the same race track or to change lane at a pre-set portions on the track.

Most components of slot cars may be modified, upgraded, or improved for better performance. However, without a track, your slot car will look nothing more like a car model.

You can leave a response,

Mid-America Raceway – Midwest’s Largest Slot-car Supply Retailer

If you are a fan of motorcar racing corresponding to NASCAR or NHRA, however can’t afford the hundreds of thousands it takes to have a “actual” racing staff, for a small amount of funding you can not only own your personal “model” racing crew but will be the star driver too. Model racing is every bit as challenging as the true thing!

These little automobiles zip across the big track as fast as 4 seconds. The drag racers can get upwards of 100mph once they cruise down the track. You could spend hours and hours working on your car and spend thousands of dollars to get the perfect car. It’s a interest and a hobby for many individuals around the world. Slot car racing is fashionable overseas in Australia, New Zealand, Europe, & Asia.

There are numerous components to a slotcar track and vehicle that should be tweaked if you wish to race your best. You will need the fitting tires, brakes (controller), motor, gears, and physique similar to a real race car. Crucial a part of the slot automobile components is the race car driver and his/her ability to brake in the turns and pace by the straight aways.

Mid-America is situated in Montgomery,IL and is the house of many giant tournaments for slot car enthusiasts. If your interest is a 1/32 slot car racing set to your dwelling, or cars, components and equipment in your dwelling race set, Mid-America has Scalextric slot vehicles, SCX, Ninco, Fly, Monogram and Slotter slot cars.

Are you on the lookout and searching out for slotcar motors? It doesn’t matter in the event you need a Falcon, Plafit, Parma 16-D, Proslot Tremendous sixteen-D,Koford Tremendous Wasp, Better of the West Hornet, Challenger, Contender, Mura Sportsman, Group 12,Proslot Group-15,Koford Group 27, PK Group-7 or Valiko Eurosport. Motors and alternative and restore components resembling armatures, ceramic magnets and cobalt magnets, brushes and is derived are important for racing. Mid-America Raceway has the widest selection anyplace from Valiko, Koford, ProSlot, Kelly Racing,Lee Gilbert’s Speedshop, Parma, WrightWay, PK, Slick7, Camen, Pla-Match, Falcon, Mura, Champion, Alpha, Cahoza, Crimson Fox, RL, Kamen, ProFormance Racing Inc., and others. Mid-America Raceway even custom builds motors, constructed to suit your slotcar needs.

Need a slot automotive Chassis? There are 1/24 Eurosport 1/32 Eurosport, 1/32 F-1 Eurosport , Open-12, NASCAR, GT-1, GTP, GT-12, Drag Racing, Gr12, Int-15, G-27, and G-7 Open chassis in stock from Brian Saunders, Richard Mack, Horky, Koford, BRM, Mossetti Racing, JK Merchandise, WRP, JDS, DRS, Slick7, Parma, Proslot, Crimson Fox, Champion, Kelly Racing, and more.

Do you need gears in your slot car? There are Horky, Crimson Fox, Valiko, ARP, GT-1, Kelly, Koford, Parma, JK, Sonic, Slick 7, Proslot , Sigma, BRM, and more. How about tools? We stock tools for your Slot automotive needs from Hakko soldering irons , Sonic fiddle sticks, Carlisle Slot Jigs, Goat-Boy can tools, Dremel, Lucky Bob’s acid flux , Hudy comm Cutters, and Hudy tires grinders, K&S, Magne-Hone, and more. We inventory Wrightway durometers, electronic scales, gauss meters, energy provides, arm meters, moto-instruments, commutator cutters, tire grinders, soldering irons, slate blocks, chassis jigs, allen wrenches, silver solder, and flux.

Slot car racing is also very competitive and there are large tournaments with prizes. To search out out extra about slot car racing check out Mid-America Raceway and their racing rules. Here is a pattern of some of the native track rules.

Slotcar Qualifying:

* Driver qualifying order will be by random selection.

* Qualifying will probably be 1 minute in duration.

* Total rating might be based mostly on the quickest lap time.

* Ties can be damaged by the second fastest lap time.

* Any driver who misses their qualifying time can be ranked in last position.

* 1/24, 1/32 and F1 eurosports will qualify on the orange lane.

* Open GP-12, C12, JRL and B-manufacturing will qualify on the blue lane.

Slotcar Race:

* Every race will probably be run as a fundamental beginning with the slowest ending with

* The fastest. (i.e. C-fundamental runs before the B-foremost and the B-important runs before the A-main.)

* Drivers will probably be loaded into their mains based mostly on the Driver Loading Plan (PDF)

* JRL and B-manufacturing will run three minute heats.

* Open GP-12 and C12 will run 4 minute heats.

* 1/24, 1/32 and F1 eurosports will run 5 minute heats.

* All slot automobile races can have a 1 minute intermission between heats.

* Work on slotcars is allowed throughout the intermission.

Slotcar Turn Marshaling:

* If you happen to race you need to turn slot car marshal.

1. drivers on the end of their primary should marshal the next most important or at any time when called upon.

2. the variety of slot car marshals should be the same in every main.

3. a 10 lap penalty might be given for lacking marshaling.

In case you are looking to get into slotcar racing there is a lot you’ll need to know. I encourage studying the rules and finding out what kind of slotcar you want to race. Many slot car tracks have schedules on certain days of the week that anyone can take their cars in and observe the race with their friends.